Product ID:STOODY 31
MSDS Date:03/03/1997
FSC:3439
NIIN:00-165-4182
MSDS Number: CGMFG

STOODY CO

5557 NASHVILLE RD
BOWLING GREEN, KY 42102-4997
US

Emergency Phone: 502-781-9777

Info Phone: 502-781-9777

Cage: 57965

STOODY CO

90032 BOWLING GREEN, KY 42102-9032 US

Telephone: 502-781-9777

Cage: 57965

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.4-5.0%

OSHA PEL C, 5 MG/M3 (FUME)

ACGIH TLV: 0.2 MG/M3; 9596

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.2-3.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 15-32%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-4%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9596

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-10%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BALANCE

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-8%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 0-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 0-7%

OSHA PEL 15 MPPCF; Z-3

ACGIH TLV: 2 MG/M3 RDUST; 9596

TUNGSTEN,AS W,SOLUBLE COMPOUNDS.

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0-5%

OSHA PEL NOE ESTABLISHED

ACGIH TLV: 1 MG/M3/3 STEL; 9596

NIOBIUM (ALSO CALLED COLUMBIUM)

CAS: 7440-03-1

Fraction By Weight: 0-10%

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: 0-2%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9596

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 0-2%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
SENSITIVITY MAY ALSO BE NOTED. L ONG TERM EXPOSURE TO
FUMES/GASES/DUST MAY CAUSE PULMONARY IRRITATION OR PNEUMOCONIOSIS;
& SIDEROSIS FROM IRON FUMES.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE LISTED
CARCINOENS BY IARC AND NTP.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCUR FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.

First Aid:IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL
FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF
BREATHING IS D IFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONCOMBUSTIBLE. USE EXTINGUISHING MEDIA APPROPRIATE
TO THE SURROUNDING FIRE.
Fire Fighting Procedures:TO EXTINGUISH A METAL POWDER FIRE USE DRY
SAND, OR CLASS D FIRE EXTINGUISHERS. USE WATER SPRAY TO COOL NEARBY
CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUES
AND PLACE IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN
FULL COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID
INHALATION AND SKIN EXPOSU RE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:WEAR GLOVES AND FLAME RETARDANT
CLOTHING WHEN CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO
RADIATION WHEN HOT CUTTING OR WELDING.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.

Respiratory Protection:USE WELD FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:FLAMEPROOF GAUNTLER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WELDING AND HOT CUTTING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY.
THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON THE METAL BEING
WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF
CONTAMINANTS. CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NOT GIVEN
Appearance and Odor:COATED HIGH ALLOY ELECTRODES

Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS AND STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING/CUTTING OPERATIONS MAY INCLUDE
ELEMENTAL METALS, OXIDES OF THE METALS, FUMES/GASES &
ELECTROMAGNETIC RADIATION.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. CHROMIUM IS REGULATED BY EPA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.